Stitch and glue is a simple boat building method which uses plywood panels stitched together, usually with copper wire, and glued together with epoxy resin.this type of construction can eliminate much of the need for frames or ribs. plywood panels are cut to shape and stitched together to form an accurate hull shape without the need for forms or special tools.. Stitch-and-glue: anybody can build his own boat stitch-and-glue is the best way for amateurs to build their own boats. a lot of plans for all kinds of boats are available from different designers and no. The reason that stitch and glue is faster and simpler than traditional methods is that it eliminates the need for chine logs, complicated forms, and tricky clamping. and the major factor involved is the use of epoxy fillets. these not only glue the plywood panels but also cove out the inside corner where the panels meet..
Stitch and glue makes a good boat ,but the technique is messy with miles of plastic and masking tape ,mountains of sandpaper, truckloads of disposable gloves and respirators, plus much time pushing board sanders. traditional construction makes a good boat, but requires top class materials ,a first class design and good craftsmanship skills.. The devlin “stitch and glue” method is a superior way to build a wooden boat. it has been developed and refined here at devlin designing boat builders for almost 40 years, and has been adopted by other segments of the wooden boat industry.. Stitch and glue boat building is a quick and fun way to build boats using shaped plywood panels to build strong, lightweight boats. paddleboards, skiffs, rowboats, sailboats, and powerboats can be.
0 komentar:
Posting Komentar